A stress line below the ground surface which connects all the points at which vertical stress is equal is called an isobar. it is a curved surface which resembles as bulb , due to the vertical pressure at all the points below the ground surface in the horizontal plane
IMPORTANCE:
*there are used to deter mine the effect of load on vertical stress at different points .
He made it out of carbonized paper filaments in an evacuated glass bulb.
the light bulb was invented in 1779.
3 weeks
The Light Bulb
It gave us light
Shape: The pressure bulb is typically depicted as a three-dimensional shape, often resembling an inverted cone or pyramid. It extends downwards from the base of the loaded area or foundation into the soil. Distribution: Within the pressure bulb, the pressure is not uniformly distributed. It is highest at the base of the loaded area and decreases with depth. The pressure distribution is influenced by factors such as the shape and size of the foundation, the load magnitude, and the properties of the soil. Depth: The depth of the pressure bulb varies depending on the characteristics of the foundation and the soil. Deeper foundations will have deeper pressure bulbs.
The pressure bulb of a foundation can influence the depth of soil investigation by affecting the stress distribution in the soil layers. A larger pressure bulb may result in increased stress in deeper soil layers, impacting their behavior and properties. This, in turn, may require deeper soil investigation to properly understand the soil's response to loading from the foundation.
concrete qty for bulb portion in pile foundation
The Zone in a loaded soil mass bounded by any arbitrary isobar is known as a pressure bulb. The vertical pressure at any point on the surface of the pressure bulb is the same.
no
The 400W high pressure Sodium bulb contains a silver lining inside the frame to give better reflection of light. However, no silver is found inside the bulb.
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
Pressing the rubber bulb of the dropper creates a decrease in pressure inside the dropper. This pressure change allows the liquid to rise up through the tube due to the difference in pressure between the dropper and the liquid. If the bulb is not pressed, the pressure inside the dropper remains the same, preventing the liquid from being drawn up.
NO it has to do with the sense of smell
When a light bulb breaks, the sudden release of internal pressure causes the glass to shatter, creating a loud bang. The pressure is due to the gases inside the bulb, such as argon or nitrogen, that rapidly expand as the glass breaks.
The discovery of the light bulb is credited to Thomas Edison in 1879 when he successfully created a long-lasting, practical electric light bulb. This invention revolutionized the way we illuminate our homes and spaces.
The pressure inside a typical incandescent light bulb is low and close to atmospheric pressure. This low pressure is important for the bulb to be filled with inert gas, usually argon, which helps prevent the filament from oxidizing and burning out too quickly. LED light bulbs, on the other hand, operate at much lower pressures due to their solid-state design.